On 6 November 2026 the SkinSenseDiary catalogue counted 10,442 products whose ingredient list names Polysorbate 20. It is an ethoxylated sorbitan monolaurate, used as a solubiliser and an oil-in-water emulsifier to disperse fragrance and lighter oils in water. The CIR Expert Panel’s 2015 amended report concluded that polysorbate 20 is safe in cosmetics when formulated to be non-irritating, within the uses and concentrations assessed in the report.
Polysorbate 20 (INCI: Polysorbate 20) is a non-ionic surfactant made by ethoxylating a sorbitan monolaurate. The 2015 CIR report describes it as a mixture, predominantly monoesters, of laurate esters of sorbitol and sorbitol anhydrides, condensed with about 20 moles of ethylene oxide. This ingredient therefore contains on average about 20 oxyethylene units. The catalogue lists the functions emulsifier, surfactant, and viscosity modifier.
In a formula it is a formulation helper. It holds oil-soluble materials, such as fragrance and lighter oils, in a water phase, and it can help keep oil and water from separating. It does not treat acne, pigment, or wrinkles. The same INCI name is also used outside cosmetics, including in foods and in some medicines. This page is about cosmetic use.
The CIR Expert Panel’s final amended report, released 10 July 2015, reviewed 80 polysorbates together, including polysorbate 20. The qualified conclusion is the one in the introduction. It supersedes the 1984, 2000, and 2001 assessments. The report cites FDA Voluntary Cosmetic Registration Program figures for 2015: polysorbate 20 had 3,013 reported uses, up from 770 in 1998. A 2014 industry survey, quoted in the same report, put the highest maximum use concentration for polysorbate 20 at 19.6% in bath soaps and detergents, down from above 50% in the 1984 assessment. The same report gives polysorbate 20 in spray deodorants at up to 4%. Those are survey figures for categories, not the concentration in any one product on a shelf. The 3,013 uses are an FDA reporting figure from 2015. They are not the 10,442 products in this catalogue.
Its usual job is to disperse fragrance, essential oils, and other lighter oil-soluble materials in a water-based product so the liquid stays one phase. Clear toners and mists are a common place to see that job. The amount required depends on the oil and the rest of the formula.
As an oil-in-water emulsifier it helps keep an oil phase and a water phase from separating in creams, lotions, and cleansers. It is one tool for that job. A formula can use a different emulsifier, or more than one.
The catalogue lists it as a viscosity modifier as well as an emulsifier and a surfactant. Those are formulation roles. They are not a claim that the ingredient moisturises, exfoliates, or changes a skin condition.
The catalogue lists a surfactant function. In rinse-off products that can contribute to cleansing.
Where it shows up: water-based toners and mists, cleansers, creams, hair products, and colour cosmetics. How a product feels depends on the whole formula and the person. A person who already reacts to a product has to read the whole list, not this one name.
Polysorbate 20 and PEG-40 hydrogenated castor oil are compared here on what each ingredient is, where their uses overlap, and what limits the amount in a formula.
| Polysorbate 20 | PEG-40 hydrogenated castor oil | |
|---|---|---|
| What it is | An ethoxylated sorbitan monolaurate. A solubiliser and an oil-in-water emulsifier, commonly chosen for fragrance and lighter oils. | Made from hydrogenated castor oil. Pharmacopoeia name: polyoxyl 40 hydrogenated castor oil. Commonly chosen for fragrance and essential oils in water-based toners and mists. |
| Overlapping uses | Dispersing fragrance and oils in water, and helping an oil phase stay mixed with water. | Dispersing fragrance and essential oils in water, including in water-based toners and mists. |
| Formulation limits | The amount depends on the oil and the rest of the formula. A matching hazard-signal rating does not make these two ingredients interchangeable. | The amount depends on the oil and the rest of the formula. The PEG-40 hydrogenated castor oil page gives that ingredient’s own assessment. |
The written list of familiar ingredients sets this number directly. For a name on that list, hazard statements are not read, and the step that adds one point for an EU restriction reference is not applied. This number is not the CIR conclusion, and it is not a judgement on any single product. How our hazard-signal rating works.
The final amended report (panel meeting 15–16 June 2015, released 10 July 2015) is the source of the qualified conclusion in the introduction. Polysorbate 20 is named first among the polysorbates it covers. The conclusion supersedes the 1984, 2000, and 2001 assessments. The report quotes 3,013 VCRP uses for polysorbate 20 in 2015, and a 2014 maximum of 19.6% in bath soaps and detergents, with spray deodorants up to 4%. CIR’s review reported little or no irritation or sensitisation in the dermal studies at the concentrations tested.
Separate from those dermal studies, published reports describe immediate hypersensitivity after medicines. The CIR dermal studies assessed skin irritation and contact sensitisation, by the topical route. The drug reports assessed immediate hypersensitivity after injected or orally administered medicines. A positive skin test and a clinical reaction are different outcomes. An EAACI position paper separates skin-test cross-sensitisation from clinical cross-reactivity: only some people with PEG allergy react clinically to polysorbates. In one report of two patients, both had anaphylaxis after injection of a PEG-containing corticosteroid, and both had positive skin tests to polysorbate 80-containing preparations, including intradermal testing with triamcinolone acetonide (Stone et al., 2019). This drug-allergy data cannot estimate how often or how severely polysorbate 20 causes allergy in ordinary cosmetic use.
The number 20: This ingredient contains on average about 20 oxyethylene units. The CIR report notes that the number in a polysorbate name has no relationship to the size of the molecule. It marks the fatty acid: 20 laurate, 40 palmitate, 60 stearate, 80 oleate. Polysorbate 60 and polysorbate 80 also average about 20 oxyethylene units. Different polysorbate numbers are different ingredients. You cannot infer the number of oxyethylene units from the polysorbate number.
Use levels in the 2015 report: The highest maximum the report quotes for polysorbate 20 is 19.6% in bath soaps and detergents (2014 industry survey), and up to 4% in spray deodorants. For polysorbate 20 itself, Table 6 of the same report gives a 2014 survey leave-on range of 0.00001–9.1%. That maximum is a concentration reported in the survey. It is not a recommended level, not a legal limit, and not the concentration in a reader’s product. A place near the end of an INCI list does not reveal the percentage.
1,4-Dioxane and ethylene oxide: The 2015 report says ethoxylated ingredients can contain trace 1,4-dioxane, a by-product of ethoxylation and a known animal carcinogen. The same discussion says residual ethylene oxide may also be present as an impurity. The Panel said the industry should keep using the procedures that limit both impurities before the ingredient is blended into a cosmetic. The average of about 20 oxyethylene units built into this ingredient is not this residual ethylene oxide. The report does not publish a residual level for one brand’s finished product.
Penetration: The Panel notes that polysorbate 20, polysorbate 65, and polysorbate 80 enhanced the dermal penetration of a model drug in a laboratory assay. The report says care is needed when a formula pairs these ingredients with substances whose safety assessment depended on limited skin absorption, and especially in products for infants. That is a formulation caution from the report. It is not a finding that every cream containing polysorbate 20 drives other ingredients through the skin.
The 2015 CIR report does not tell people to avoid cosmetic polysorbate 20 in pregnancy, and it does not set a cosmetic concentration just for pregnancy. It does describe oral animal studies and the penetration note above, including extra care for infant products when absorption of another ingredient was part of that ingredient’s safety case. This page does not estimate a pregnancy or nursing risk from a cream, a wash, or a spray. Someone who is pregnant or nursing and wants advice about a specific product should ask their own clinician.
Look for the INCI name Polysorbate 20. Labels in other markets may also show 聚山梨醇酯-20, ポリソルベート20, or 폴리솔베이트20. Those are the written Chinese name and the Japanese (JCIA) and Korean (KCID and MFDS) names. Under Regulation (EC) No 1223/2009, Article 19(1)(g), ingredients are listed in descending order of weight when they are added, and ingredients below 1% may be listed in any order after the ones at or above 1%. A position near the end does not reveal the percentage. Tween 20 on a technical sheet is a trade name for the same surfactant, not a different safety case. PEG-20 sorbitan laurate is another name the CIR report discusses as a term for polysorbate 20; the report says it could not confirm that every company using that wording meant this INCI, so this page does not add those products into the 10,442.
Another solubiliser for fragrance and oils in water. What it is, where the uses overlap, and what limits the amount are in the comparison table.
The wax before ethoxylation. It is not this solubiliser, and it is not PEG-40 hydrogenated castor oil.
The mixture called Parfum. Holding fragrance and lighter oils in water can be this ingredient’s job in a formula.
On 6 November 2026 the catalogue counted 10,442 products whose ingredient list names Polysorbate 20. A product is counted once, even when several of its variants list it. The count follows the name on the list. It is not safety evidence.